GAS ARMATURES
The
W2 Armaturen GmbH
manufactures automatic pressure regulators, overflow regulators, safety shut-off valves and safety relief valves for all types of gases.
Gas pressure regulator
Type 132
The gas pressure regulator type 132 has the task of keeping the outlet pressure constant, regardless of the influence of disturbance variables such as changes in inlet pressure and/or flow rate. Can be used for all gases according to DVGW worksheet G260.
High control accuracy, short response time
– Guide range: 0.03 bar – 8.0 bar
– Max. Inlet pressure: up to 25 bar
– Temperature range: -15 °C to +60 °C
– Design: in accordance with PED 2014/68/EU and EN 334
– DN 50 to DN 500
– ANSI and special flanges also possible according to customer requirements
Safety shut-off valve
TYPE 53 N/H
The safety shut-off valve type 53 N/H has the task of protecting downstream fittings, e.g. in gas pressure regulating systems, against impermissible excess pressure and/or lack of pressure. Can be used for all gases according to DVGW worksheet G260.
High control accuracy, short response time
– Guide range: 0.01 bar – 7.5 bar
– Max. Inlet pressure: up to 35 bar
– Min. Pressure difference: 20 mbar
– Design: in accordance with PED 2014/68/EU and EN 334
– DN 50 to DN 500
– ANSI and special flanges also possible according to customer requirements
Combination
SAV-GDR combination type 53/132 + SBV
Further information can be found here:
➜ SAV type 53 N/H
➜ SBV
Integration of SAV, GDR, outlet section and possibly SBV in one housing. The unit can be delivered completely pre-assembled and pre-set. No further installation work is required on the construction site
Safety blow-off valve
Type 11 / Type 12
The safety relief valve type 11 has the task of automatically releasing a gas flow from a pressurized line as soon as the pressure in the system to be protected reaches the set response pressure. The safety relief valve closes automatically when the pressure in the system to be protected falls below the set pressure again. Can be used for all gases according to DVGW worksheet G260.
– Safety relief valve with spring-loaded measuring unit
– High response accuracy
– Can be installed in any position
– Type 12 with internal…
– No external …line required
– Guide range: 0.03 bar – 8.0 bar
– Max. Inlet pressure: up to 25 bar
– Temperature range: -15 °C to +60 °C
– Design: in accordance with PED 2014/68/EU and EN 334
Fields of application
Customized fitting solution
for your fields of application and industry.
- Pipeline & gas grids
- Gas plants & gas turbines, compressors
- Power plant technology
- Refineries & Petrochemicals
- Steel mills
We have the right solution.
Solid, liquid or gaseous. High-quality production techniques from W2 Armaturen.